added standard examples for open62541(pp)

CMakePresets.json

@@ -18,7 +18,9 @@
       "cacheVariables": {
         "CPP_STARTER_USE_SML": "ON",
         "CPP_STARTER_USE_BOOST_BEAST": "ON",
-        "CPP_STARTER_USE_CROW": "ON"
+        "CPP_STARTER_USE_CROW": "ON",
+        "CPP_STARTER_USE_OPEN62541PP": "ON",
+        "CPP_STARTER_USE_OPEN62541": "ON"
       }
     },
     {

cmake/Options.cmake

@@ -36,6 +36,8 @@ OPTION(CPP_STARTER_USE_CROW "Enable compilation of crow sample" OFF)
 OPTION(CPP_STARTER_USE_CPPZMQ_PROTO "Enable compilation of protobuf and cppzmq sample" OFF)
 OPTION(CPP_STARTER_USE_EMBEDDED_TOOLCHAIN "Enable compilation of an example cortex m4 project" OFF)
 OPTION(CPP_STARTER_USE_QT "Enable compilation of an example QT project" OFF)
+OPTION(CPP_STARTER_USE_OPEN62541PP "Enable compilation of an example open62541pp wrapper project" OFF)
+OPTION(CPP_STARTER_USE_OPEN62541 "Enable compilation of an example open62541 project" OFF)
 
 # test frameworks
 OPTION(CPP_STARTER_USE_CATCH2 "Enable compilation of an example test project using catch2" ON)

conanfile.py

@@ -7,7 +7,7 @@
 class HelloConan(ConanFile):
     settings = 'os', 'compiler', 'build_type', 'arch'
     generators = 'CMakeDeps', 'CMakeToolchain'
-    default_options = {'fmt/*:header_only': True, 'spdlog/*:header_only': True, 'qt/*:with_fontconfig': False}
+    default_options = {'fmt/*:header_only': True, 'spdlog/*:header_only': True, 'qt/*:with_fontconfig': False, 'open62541/*:cpp_compatible': True}
 
     def requirements(self):
         if self.settings.get_safe('arch') == 'armv7':
@@ -22,12 +22,14 @@ def requirements(self):
         if os.getenv("CONFIGURE_QT") == '1':
             self.requires('qt/6.7.3')
         else:
+
             self.requires('sml/1.1.11')
             self.requires('nlohmann_json/3.11.3')
             self.requires('boost/1.87.0')
             self.requires('crowcpp-crow/1.2.0')
             self.requires('cppzmq/4.10.0')
             self.requires('protobuf/5.29.3')
+            self.requires('open62541/1.4.6')
 
     def configure(self):
         cmake = CMakeToolchain(self)

src/CMakeLists.txt

@@ -36,6 +36,18 @@ IF(CPP_STARTER_USE_QT)
     ADD_SUBDIRECTORY(qt)
 ENDIF()
 
+# open62541pp example
+IF(CPP_STARTER_USE_OPEN62541PP)
+    MESSAGE("Using open62541pp")
+    ADD_SUBDIRECTORY(open62541pp)
+ENDIF()
+
+# open62541 example
+IF(CPP_STARTER_USE_OPEN62541)
+    MESSAGE("Using open62541")
+    ADD_SUBDIRECTORY(open62541)
+ENDIF()
+
 
 FIND_PACKAGE(docopt REQUIRED)
 FIND_PACKAGE(spdlog REQUIRED)

src/open62541/CMakeLists.txt

@@ -0,0 +1,5 @@
+ADD_EXECUTABLE(open62541_client client.cpp)
+TARGET_LINK_LIBRARIES(open62541_client PRIVATE open62541::open62541)
+
+ADD_EXECUTABLE(open62541_server server.cpp)
+TARGET_LINK_LIBRARIES(open62541_server PRIVATE open62541::open62541)

src/open62541/client.cpp

@@ -0,0 +1,32 @@
+#include <open62541/client.h>
+#include <open62541/client_highlevel.h>
+#include <open62541/client_config_default.h>
+
+// This example is the original one from the open62541 examples
+
+int main()
+{
+    /* Create a client and connect */
+    UA_Client *client = UA_Client_new();
+    UA_ClientConfig_setDefault(UA_Client_getConfig(client));
+    UA_StatusCode status = UA_Client_connect(client, "opc.tcp://localhost:4840");
+    if (status != UA_STATUSCODE_GOOD) {
+        UA_Client_delete(client);
+        return status;
+    }
+
+    /* Read the value attribute of the node. UA_Client_readValueAttribute is a
+     * wrapper for the raw read service available as UA_Client_Service_read. */
+    UA_Variant value;/* Variants can hold scalar values and arrays of any type */
+    UA_Variant_init(&value);
+    status = UA_Client_readValueAttribute(client, UA_NODEID_STRING(1, "the.answer"), &value);
+    if (status == UA_STATUSCODE_GOOD && UA_Variant_hasScalarType(&value, &UA_TYPES[UA_TYPES_INT32]))
+    {
+        printf("the value is: %i\n", *static_cast<UA_Int32 *>(value.data));
+    }
+
+    /* Clean up */
+    UA_Variant_clear(&value);
+    UA_Client_delete(client);/* Disconnects the client internally */
+    return status == UA_STATUSCODE_GOOD ? EXIT_SUCCESS : EXIT_FAILURE;
+}

src/open62541/server.cpp

@@ -0,0 +1,19 @@
+#include <open62541/server.h>
+#include <open62541/server_config_default.h>
+
+// This example is the original one from the open62541 examples
+
+int main()
+{
+    UA_Server *server = UA_Server_new();
+    UA_Server_run_startup(server);
+
+    /* Should the server networklayer block (with a timeout) until a message
+       arrives or should it return immediately? */
+    const UA_Boolean waitInternal = true;
+    while (true) { UA_Server_run_iterate(server, waitInternal); }
+
+    UA_Server_run_shutdown(server);
+    UA_Server_delete(server);
+    return 0;
+}

src/open62541pp/CMakeLists.txt

@@ -0,0 +1,16 @@
+INCLUDE(FetchContent)
+
+FETCHCONTENT_DECLARE(
+        open62541pp
+        GIT_REPOSITORY https://github.com/open62541pp/open62541pp.git
+        GIT_TAG v0.15.0
+)
+FETCHCONTENT_MAKEAVAILABLE(open62541pp)
+
+ADD_EXECUTABLE(open62541pp_client client.cpp)
+TARGET_LINK_LIBRARIES(open62541pp_client PRIVATE open62541pp::open62541pp)
+TARGET_INCLUDE_DIRECTORIES(open62541pp_client PUBLIC ${open62541pp_SOURCE_DIR})
+
+ADD_EXECUTABLE(open62541pp_server server.cpp)
+TARGET_LINK_LIBRARIES(open62541pp_server PRIVATE open62541pp::open62541pp)
+TARGET_INCLUDE_DIRECTORIES(open62541pp_server PUBLIC ${open62541pp_SOURCE_DIR})

src/open62541pp/client.cpp

@@ -0,0 +1,13 @@
+#include <iostream>
+
+#include <open62541pp/open62541pp.h>
+
+int main() {
+    opcua::Client client;
+    client.connect("opc.tcp://localhost:4840");
+
+    opcua::Node node = client.getNode(opcua::VariableId::Server_ServerStatus_CurrentTime);
+    const auto dt = node.readValueScalar<opcua::DateTime>();
+
+    std::cout << "Server date (UTC): " << dt.format("%Y-%m-%d %H:%M:%S") << "\n";
+}

src/open62541pp/server.cpp

@@ -0,0 +1,15 @@
+#include <open62541pp/open62541pp.h>
+
+int main() {
+    opcua::Server server;
+
+    // Add a variable node to the Objects node
+    opcua::Node parentNode = server.getObjectsNode();
+    opcua::Node myIntegerNode = parentNode.addVariable({1, 1000}, "TheAnswer");
+    // Write some node attributes
+    myIntegerNode.writeDisplayName({"en-US", "The Answer"})
+        .writeDataType(opcua::DataTypeId::Int32)
+        .writeValueScalar(42);
+
+    server.run();
+}